Industrial electrical switchgear in large facility, dark atmospheric environment with steel panels and dim task lighting
Sharp ElectricalServices
NICEIC Approved

Our Services

From a single socket to a full industrial installation — Sharp Electrical delivers certified, high-quality electrical work across every sector.

Domestic
Commercial
Industrial
Inspection, Testing & Certification
Bright modern home interior with warm ambient lighting, clean white walls and contemporary fixtures in a well-lit domestic room
For Homeowners

Domestic Electrical

For Homeowners

We provide comprehensive electrical services for homes across Oldham and Greater Manchester. All domestic work is carried out by qualified electricians and fully certified under Part P of the Building Regulations.

Full & partial house rewires

Complete rewiring or targeted upgrades to meet current standards.

Consumer unit / fuse board upgrades

Replace old fuse boards with modern, safer RCD-protected units.

EV charger installation

Home EV charge point supply and installation, OZEV registered.

Lighting installation & design

LED downlights, garden lighting, feature lighting, smart controls.

Smoke & carbon monoxide alarms

Mains-wired interconnected alarm systems for full protection.

Electrical fault-finding

Rapid diagnosis and repair of tripping circuits, dead sockets, and more.

Additional sockets & circuits

New socket outlets, USB sockets, dedicated appliance circuits.

Electrical inspection & testing

EICR reports for landlords, buyers, and home safety checks.

Request a Quote
Bright open-plan commercial office with overhead fluorescent lighting, white walls and clean professional workspace environment
For Businesses & Premises

Commercial Electrical

For Businesses & Premises

We deliver reliable, code-compliant electrical solutions for commercial clients — from small retail units to multi-floor office buildings. We work around your schedule to minimise disruption.

Office fit-outs & refurbishments

Full electrical installation for new or refurbished office spaces.

Retail unit electrics

Shop-floor lighting, till points, display lighting, and power.

Three-phase power supply

Three-phase installation and distribution for commercial loads.

Emergency & exit lighting

BS 5266 compliant emergency lighting systems, tested and certified.

Fire alarm systems

Design, supply, install, and commission of fire detection systems.

PAT testing

Portable appliance testing with full documentation for compliance.

CCTV & security systems

IP camera systems, access control, and intruder alarm wiring.

Data & structured cabling

Cat5e/Cat6 network cabling, server room installations.

Request a Quote
Large industrial factory floor with heavy manufacturing equipment, dim atmospheric lighting and dark steel walls and ceiling in a vast industrial space
For Factories & Large Sites

Industrial Electrical

For Factories & Large Sites

We have the expertise and certification to handle the most demanding industrial electrical projects — safely, efficiently, and to the highest standards.

Industrial panel & switchgear installation

MCC panels, distribution boards, and HV/LV switchgear.

Motor & machinery wiring

Control panel wiring, motor circuits, VFD installations.

Warehouse & factory lighting

LED high-bay and floodlight systems for large spaces.

Planned preventative maintenance

Scheduled inspection and testing programmes to prevent downtime.

Cable management systems

Containment, trunking, tray, and conduit installations.

ATEX & hazardous area work

Certified installations in zones classified as hazardous.

Power factor correction

PFC units to reduce energy waste and improve efficiency.

Thermographic surveys

Infrared surveys to identify overloaded or failing connections.

Request a Quote
Professional electrician using a multifunction test instrument to carry out electrical inspection and testing on a consumer unit panel
EICR, PAT & Compliance Reports

Inspection, Testing & Certification

EICR, PAT & Compliance Reports

We are fully accredited to carry out electrical inspection, testing, and certification across domestic, commercial, and industrial properties. Our NICEIC-approved engineers produce legally recognised certificates and condition reports — relied upon by landlords, letting agents, businesses, solicitors, and insurers alike. Whether you need an EICR ahead of a property sale, a landlord safety certificate to meet legal obligations, or a full installation certificate for new works, we deliver thorough, impartial assessments with clear, jargon-free reports issued on the same day.

Electrical Installation Condition Reports (EICR)

Comprehensive inspection of existing installations against BS 7671 — mandatory for rental properties every 5 years.

Landlord electrical safety certificates

Legally required certificates for private landlords, issued promptly to keep your property compliant and tenants safe.

New installation certificates (EIC)

Electrical Installation Certificates issued for all new circuits and installations, as required by Part P of the Building Regulations.

Minor works certificates (MEIWC)

Issued for additions or alterations to existing circuits, providing a full paper trail for compliance and insurance.

PAT testing & asset registers

Portable Appliance Testing for businesses, schools, and landlords — with full documentation and asset registers provided.

Pre-purchase electrical surveys

Independent inspection reports for buyers and solicitors, highlighting any defects or safety concerns before exchange.

Insurance & mortgage inspection reports

Detailed condition reports accepted by insurers and mortgage lenders, providing confidence in the safety of an installation.

Remedial works following failed EICRs

We identify faults, quote for remedial works, and re-test to bring your installation up to a satisfactory standard.

Request a Quote
Electrical Safety

Is Your Wiring Up to
Modern Standards?

Older electrical installations may not be unsafe — but they almost certainly don't meet the latest safety standards. Modern regulations have introduced significant improvements designed to protect lives and property. Here's what you need to know.

Residual Current Devices

RCD Protection

RCDs detect dangerous imbalances in electrical current and cut power in milliseconds — protecting you and your family from potentially fatal electric shocks. Modern regulations require RCD protection throughout the home.

Surge Protection Devices

SPD Protection

SPDs protect your entire electrical installation — and everything plugged into it — from voltage spikes caused by lightning strikes or grid switching. A single surge can destroy appliances, TVs, computers, and white goods.

Metal Consumer Unit Housings

Non-Combustible Enclosures

Current regulations require consumer units to be housed in non-combustible (metal) enclosures. If an internal fault causes a fire inside the unit, a metal enclosure contains it — a plastic one can spread it throughout your home.

Building Regulations Notification

Part P Compliance

Certain electrical works in the home legally require notification to your local authority under Part P of the Building Regulations. This includes full rewires, consumer unit replacements, and new circuits in kitchens and bathrooms.

Building Regulations

When Part P Applies

Part P of the Building Regulations requires that certain electrical work in dwellings is either carried out by a registered competent person (like a NICEIC-registered electrician) or notified to your local authority. Failure to comply can cause issues when selling your home and may invalidate your insurance.

Works that typically require notification:

  • Full house rewires
  • Consumer unit / fuse board replacements
  • New circuits in kitchens or bathrooms
  • Electrical work in outbuildings
  • New circuits from the consumer unit

Older Installations

Signs You May Need an Upgrade

Your installation may be working fine — but if it was installed more than 25 years ago, it almost certainly lacks the safety features required by today's standards. This doesn't mean it's immediately dangerous, but an upgrade will significantly improve protection for your home and family.

Old-style rewireable fuses (no RCD protection)
Plastic consumer unit (fire risk if fault occurs)
No surge protection on your installation
Rubber or fabric-insulated wiring (pre-1960s)
Regularly tripping circuits or blown fuses
Sockets or switches that feel warm to the touch
Credentials

Accreditations &
Certifications.

Our qualifications and registrations mean you can trust every job we complete — from a single socket to a full industrial fit-out.

Sharp Electrical Oldham branding card showing bold diagonal red and black geometric design with company identity

NICEIC

National Inspection Council...

The UK's leading electrical certification body. All our work meets NICEIC standards and is backed by their consumer guarantee.

Part P

Building Regulations Part...

All domestic electrical work is notified and certified under Part P of the Building Regulations, ensuring legal compliance.

18th Edition

BS 7671 18th...

Our team is fully trained and certified to the current 18th Edition IET Wiring Regulations — the standard for all UK electrical installations.

EV Charging

OZEV Registered Installer...

We are registered with the Office for Zero Emission Vehicles for domestic EV charge point installations.

Oldham & Greater Manchester

Need an Electrical Contractor?

Get in touch today for a free, no-obligation quote. We respond quickly and always put quality first.

Get a Free QuoteCall Sharp Electrical